FileMgr

✏️ /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-network-config-v1.json

✕ Tutup

{
  "$schema": "http://json-schema.org/draft-07/schema#",
  "$defs": {
    "anyOf_type_physical": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "type",
        "name"
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "physical"
          ]
        },
        "name": {
          "type": "string",
          "maxLength": 15,
          "description": "Desired device name should be less than 15 characters. Any characters exceeding 15 will be truncated. This is a limitation of the Linux kernel network-device structure."
        },
        "mac_address": {
          "type": "string",
          "description": "The lowercase MAC address of the physical device."
        },
        "mtu": {
          "type": [
            "integer",
            "null"
          ],
          "description": "The MTU size in bytes. The ``mtu`` key represents a device's Maximum Transmission Unit, which is the largest size packet or frame, specified in octets (eight-bit bytes), that can be sent in a packet- or frame-based network. Specifying ``mtu`` is optional. Values too small or too large for a device may be ignored by that device."
        },
        "subnets": {
          "type": "array",
          "items": {
            "$ref": "#/$defs/config_type_subnet"
          }
        },
        "accept-ra": {
          "type": "boolean",
          "description": "Whether to accept IPv6 Router Advertisements (RA) on this interface. If unset, it will not be rendered"
        },
        "keep_configuration": {
          "type": "boolean",
          "description": "Designate the connection as 'critical to the system', meaning that special care will be taken not to release the assigned IP when the daemon is restarted. (only recognized by Netplan renderer)."
        }
      }
    },
    "anyOf_type_bond": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "type",
        "name"
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "bond"
          ]
        },
        "name": {
          "type": "string",
          "description": "Desired device name should be less than 15 characters. Any characters exceeding 15 will be truncated. This is a limitation of the Linux kernel network-device structure."
        },
        "mac_address": {
          "type": "string",
          "description": "When specifying MAC Address on a bond this value will be assigned to the bond device and may be different than the MAC address of any of the underlying bond interfaces. Specifying a MAC Address is optional. If ``mac_address`` is not present, then the bond will use one of the MAC Address values from one of the bond interfaces"
        },
        "bond_interfaces": {
          "type": "array",
          "description": "The list of network device ``name``s associated with this bond. This list may be empty.",
          "items": {
            "type": "string"
          }
        },
        "mtu": {
          "type": "integer",
          "description": "The MTU size in bytes. This ``mtu`` key represents a device's Maximum Transmission Unit, which is the largest size packet or frame, specified in octets (eight-bit bytes), that can be sent in a packet- or frame-based network. Specifying ``mtu`` is optional. Values too small or too large for a device may be ignored by that device."
        },
        "accept-ra": {
          "type": "boolean",
          "description": "Whether to accept IPv6 Router Advertisements (RA) on this interface. If unset, it will not be rendered"
        },
        "params": {
          "description": "The ``params`` key in a bond holds a dictionary of bonding parameters. This dictionary may be empty. For more details on what the various bonding parameters mean please read the [Linux Kernel Bonding.txt](https://www.kernel.org/doc/Documentation/networking/bonding.txt).",
          "additionalProperties": false,
          "properties": {
            "bond-active_slave": {
              "type": "string",
              "description": "Specifies active follower interface name for modes that support it (active-backup, balance-alb and balance-tlb)."
            },
            "bond-ad_actor_key": {
              "type": "string"
            },
            "bond-ad_actor_sys_prio": {
              "type": "integer",
              "description": "In an AD system, set the system priority",
              "default": 65535
            },
            "bond-ad_actor_system": {
              "type": "string",
              "description": "In an AD system, set the mac-address for the actor in protocol packet exchanges (LACPDUs)"
            },
            "bond-ad_aggregator": {
              "type": "string"
            },
            "bond-ad_num_ports": {
              "type": "integer"
            },
            "bond-ad_partner_key": {
              "type": "string"
            },
            "bond-ad_partner_mac": {
              "type": "string"
            },
            "bond-ad_select": {
              "type": "string",
              "description": "Specifies the 802.3ad aggregation selection logic to use"
            },
            "bond-ad_user_port_key": {
              "type": "string"
            },
            "bond-all_slaves_active": {
              "type": "string"
            },
            "bond-arp_all_targets": {
              "type": "string"
            },
            "bond-arp_interval": {
              "type": "integer"
            },
            "bond-arp_ip_target": {
              "type": "string"
            },
            "bond-arp_validate": {
              "type": "boolean"
            },
            "bond-downdelay": {
              "type": "integer",
              "description": "The time, in milliseconds, to wait before disabling a slave after a link failure has been detected. This option is only valid for the miimon link monitor and should be a multiple of ``bond-miimon` value."
            },
            "bond-fail_over_mac": {
              "type": "string",
              "description": "Whether active-backup mode should set all slaves to the same MAC address at enslavement. See: https://www.kernel.org/doc/Documentation/networking/bonding.txt"
            },
            "bond-lacp_rate": {
              "type": "string",
              "description": "The rate in which we'll ask our link partner to transmit LACPDU packets in 802.3ad mode."
            },
            "bond-lp_interval": {
              "type": "integer",
              "description": "The number of seconds between instances where the bonding driver sends learning packets to each slaves peer switch."
            },
            "bond-miimon": {
              "type": "integer",
              "description": "The MII link monitoring frequency in milliseconds. How often the link state is inspected for link failures.",
              "default": 0
            },
            "bond-mii_status": {
              "type": "string"
            },
            "bond-min_links": {
              "type": "integer",
              "description": "The minimum number of links that must be active before asserting carrier.",
              "default": 0
            },
            "bond-mode": {
              "type": "string",
              "description": "Specifies one of the bonding policies.",
              "default": "balance-rr",
              "enum": [
                "balance-rr",
                "active-backup",
                "balance-alb",
                "balance-tcp",
                "balance-tlb",
                "balance-slb",
                "balance-xor",
                "broadcast",
                "802.3ad"
              ]
            },
            "bond-num_grat_arp": {
              "type": "integer",
              "description": "The number of gratuitous ARP peer notifications to issue after failover event. Delay between notifications is set by ``bond-peer_notif_delay``.",
              "minimum": 0,
              "maximum": 255
            },
            "bond-num_unsol_na": {
              "type": "integer",
              "description": "The number of unsolicited IPv6 Neighbor Advertisements peer notifications to issue after failover event. Delay between notifications is set by ``bond-peer_notif_delay``.",
              "minimum": 0,
              "maximum": 255
            },
            "bond-packets_per_slave": {
              "type": "integer",
              "description": "The number of packets to transmit through a slave before moving to the next one.",
              "minimum": 0,
              "maximum": 65535
            },
            "bond-peer_notif_delay": {
              "type": "integer",
              "description": "The delay, in milliseconds, between each peer notification (``bond-num_grat_arp`` and ``bond-num_unsol_na``) when they are issued after a failover event."
            },
            "bond-primary": {
              "type": "string",
              "description": "The interface name (eth0, eth2, etc) specifying which interface is the primary device."
            },
            "bond-primary_reselect": {
              "type": "string",
              "description": "The reselection policy for the primary slave. This affects how the primary slave is chosen to become the active slave when failure or recovery occurs.",
              "enum": [
                "always",
                "better",
                "failure"
              ]
            },
            "bond-queue_id": {
              "type": "string"
            },
            "bond-resend_igmp": {
              "type": "string"
            },
            "bond-slaves": {
              "type": "string"
            },
            "bond-tlb_dynamic_lb": {
              "type": "string"
            },
            "bond-updelay": {
              "type": "string"
            },
            "bond-use_carrier": {
              "type": "string"
            },
            "bond-xmit_hash_policy": {
              "type": "string"
            }
          }
        },
        "subnets": {
          "type": "array",
          "items": {
            "$ref": "#/$defs/config_type_subnet"
          }
        }
      }
    },
    "anyOf_type_bridge": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "type",
        "name",
        "bridge_interfaces",
        "params"
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "bridge"
          ]
        },
        "name": {
          "type": "string",
          "description": "Name of the bridge device."
        },
        "bridge_interfaces": {
          "type": "array",
          "description": "Specify the ports of a bridge via their ``name``. This list may be empty.",
          "items": {
            "type": "string"
          }
        },
        "accept-ra": {
          "type": "boolean",
          "description": "Whether to accept IPv6 Router Advertisements (RA) on this interface. If unset, it will not be rendered"
        },
        "params": {
          "type": "object",
          "additionalProperties": false,
          "description": "Key value pairs of bridge params. For more details, please read the ``bridge-utils-interfaces`` manpage.",
          "properties": {
            "bridge_ageing": {
              "type": "integer",
              "description": "Set the bridge's ageing value."
            },
            "bridge_bridgeprio": {
              "type": "integer",
              "description": "Set the bridge's device network priority."
            },
            "bridge_fd": {
              "type": "integer",
              "description": "Set the bridge's forward delay."
            },
            "bridge_hello": {
              "type": "integer",
              "description": "Set the bridge's hello value."
            },
            "bridge_hw": {
              "type": "string",
              "description": "Set the bridge's MAC address."
            },
            "bridge_maxage": {
              "type": "integer",
              "description": "Set the bridge's max age value."
            },
            "bridge_maxwait": {
              "type": "integer",
              "description": "Set how long network scripts should wait for the bridge to be up."
            },
            "bridge_pathcost": {
              "type": "array",
              "items": {
                "type": "string"
              },
              "description": "Set the cost of a specific port on the bridge. The format of each string will be a space-delmited device ``name`` followed by an integer cost for that port."
            },
            "bridge_portprio": {
              "type": "array",
              "items": {
                "type": "string"
              },
              "description": "Set the priority of a specific port on the bridge. The format of each string will be a space-delmited device ``name`` followed by an integer priority for that port."
            },
            "bridge_ports": {
              "type": "array",
              "items": {
                "type": "string"
              },
              "description": "List of devices by ``name`` that are part of a bridge."
            },
            "bridge_stp": {
              "type": "string",
              "enum": [
                "on",
                "off"
              ],
              "description": "Set spanning tree protocol on or off"
            },
            "bridge_waitport": {
              "type": "array",
              "items": {
                "type": "string"
              },
              "description": "Set the amount of time in seconds to wait on specific ports to become available. The format of each string will be a space-delmited device ``name`` followed by an integer wait in seconds for that port."
            }
          }
        },
        "subnets": {
          "type": "array",
          "items": {
            "$ref": "#/$defs/config_type_subnet"
          }
        }
      }
    },
    "anyOf_type_vlan": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "type",
        "name",
        "vlan_link",
        "vlan_id"
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "vlan"
          ]
        },
        "name": {
          "type": "string",
          "description": "Name of the VLAN."
        },
        "vlan_link": {
          "type": "string",
          "description": "Specify the underlying link via its ``name``."
        },
        "vlan_id": {
          "type": "integer",
          "description": "Specify VLAN numeric id."
        },
        "mtu": {
          "type": "integer",
          "description": "The MTU size in bytes. The ``mtu`` key represents a device's Maximum Transmission Unit, which is the largest size packet or frame, specified in octets (eight-bit bytes), that can be sent in a packet- or frame-based network. Specifying ``mtu`` is optional. Values too small or too large for a device may be ignored by that device."
        },
        "subnets": {
          "type": "array",
          "items": {
            "$ref": "#/$defs/config_type_subnet"
          }
        },
        "mac_address": {
          "type": "string",
          "description": "When specifying MAC Address on a VLAN subinterface this value will be assigned to the vlan subinterface device and may be different than the MAC address of the physical interface. Specifying a MAC Address is optional. If ``mac_address`` is not present, then the VLAN subinterface will use the MAC Address values from one of the physical interface."
        },
        "accept-ra": {
          "type": "boolean",
          "description": "Whether to accept IPv6 Router Advertisements (RA) on this interface. If unset, it will not be rendered"
        }
      }
    },
    "anyOf_type_nameserver": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "type",
        "address"
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "nameserver"
          ]
        },
        "address": {
          "description": "List of IPv4 or IPv6 address of nameservers.",
          "type": [
            "array",
            "string"
          ],
          "items": {
            "type": "string"
          }
        },
        "search": {
          "description": "List of hostnames to include in the `resolv.conf` search path.",
          "type": "array",
          "items": {
            "type": "string"
          }
        },
        "interface": {
          "type": "string",
          "description": "Optional. Ties the nameserver definition to the specified interface. The value specified here must match the ``name`` of an interface defined in this config. If unspecified, this nameserver will be considered a global nameserver."
        }
      }
    },
    "anyOf_type_route": {
      "type": "object",
      "additionalProperties": false,
      "oneOf": [
        {
          "required": [
            "network",
            "gateway"
          ]
        },
        {
          "required": [
            "destination",
            "gateway"
          ]
        }
      ],
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "route"
          ]
        },
        "network": {
          "type": "string",
          "description": "IPv4 network address with CIDR netmask notation or IPv6 with prefix length. Alias for ``destination`` and only read when ``destination`` key is absent. This exists for OpenStack support. OpenStack route definitions are passed through to v1 config and OpenStack's ``network_data.json`` uses ``network`` instead of ``destination``."
        },
        "destination": {
          "type": "string",
          "description": "IPv4 network address with CIDR netmask notation or IPv6 with prefix length. Alias for ``network`` and preferred above the ``network`` key."
        },
        "netmask": {
          "type": "string",
          "description": "IPv4 subnet mask in dotted format or CIDR notation"
        },
        "gateway": {
          "type": "string",
          "description": "IPv4 or IPv6 gateway address."
        },
        "metric": {
          "type": "integer",
          "description": "Integer which sets the network metric value for this route."
        }
      }
    },
    "config_type_subnet": {
      "type": "object",
      "additionalProperties": false,
      "properties": {
        "type": {
          "type": "string",
          "enum": [
            "dhcp4",
            "dhcp",
            "dhcp6",
            "static",
            "static6",
            "ipv6_dhcpv6-stateful",
            "ipv6_dhcpv6-stateless",
            "ipv6_slaac",
            "manual"
          ]
        },
        "control": {
          "type": "string",
          "description": "Indicate how the interface will be handled during boot",
          "enum": [
            "manual",
            "auto",
            "hotplug"
          ]
        },
        "address": {
          "type": "string",
          "description": "IPv4 or IPv6 address. It may include CIDR netmask notation."
        },
        "netmask": {
          "type": "string",
          "description": "IPv4 subnet mask in dotted format or CIDR notation"
        },
        "broadcast": {
          "type": "string",
          "description": "IPv4 broadcast address in dotted format."
        },
        "gateway": {
          "type": "string",
          "description": "IPv4 address of the default gateway for this subnet."
        },
        "dns_nameservers": {
          "type": "array",
          "description": "List of IPv4 DNS server IPs to end up in :file:`resolve.conf`.",
          "items": {
            "type": "string"
          }
        },
        "dns_search": {
          "type": "array",
          "description": "Specify a list of search paths to be included in :file:`resolv.conf`.",
          "items": {
            "type": "string"
          }
        },
        "routes": {
          "type": "array",
          "description": "Specify a list of routes for a given interface.",
          "items": {
            "$ref": "#/$defs/anyOf_type_route"
          }
        },
        "ipv4": {
          "type": "boolean",
          "description": "Indicate if the subnet is IPv4. If not specified, it will be inferred from the subnet type or address. This exists for compatibility with OpenStack's ``network_data.json`` when rendered through sysconfig."
        },
        "ipv6": {
          "type": "boolean",
          "description": "Indicate if the subnet is IPv6. If not specified, it will be inferred from the subnet type or address. This is exists for compatibility with OpenStack's ``network_data.json`` when rendered through sysconfig."
        },
        "metric": {
          "type": "integer",
          "description": "Specify metric cost for interface and routes of this subnet. "
        }
      }
    },
    "network_config_version1": {
      "type": "object",
      "additionalProperties": false,
      "required": [
        "config",
        "version"
      ],
      "properties": {
        "version": {
          "type": "integer",
          "enum": [
            1
          ]
        },
        "config": {
          "type": "array",
          "items": {
            "anyOf": [
              {
                "$ref": "#/$defs/anyOf_type_bond"
              },
              {
                "$ref": "#/$defs/anyOf_type_bridge"
              },
              {
                "$ref": "#/$defs/anyOf_type_physical"
              },
              {
                "$ref": "#/$defs/anyOf_type_nameserver"
              },
              {
                "$ref": "#/$defs/anyOf_type_route"
              },
              {
                "$ref": "#/$defs/anyOf_type_vlan"
              }
            ]
          }
        }
      }
    }
  },
  "oneOf": [
    {
      "$ref": "#/$defs/network_config_version1"
    },
    {
      "required": [
        "network"
      ],
      "properties": {
        "network": {
          "$ref": "#/$defs/network_config_version1"
        }
      },
      "additionalProperties": false
    }
  ]
}

Batal

⬅ config 6 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
📁 __pycache__	dir	—	15/06/26 13:46	0755	📂
🐍 __init__.py	py	0 B	27/02/26 22:51	0644	✏️ ⬇
📋 schema-cloud-config-v1.json	json	153.6 KB	30/03/26 18:55	0644	✏️ ⬇
📋 schema-network-config-v1.json	json	22 KB	27/02/26 22:51	0644	✏️ ⬇
📋 schema-network-config-v2.json	json	17.5 KB	27/02/26 22:51	0644	✏️ ⬇
📋 versions.schema.cloud-config.json	json	557 B	27/02/26 22:51	0644	✏️ ⬇

✏️ Rename

🔑 Ubah Permission