FileMgr

✏️ /etc/nanorc

✕ Tutup

## Sample initialization file for GNU nano.
##
## For the options that take parameters, the default value is shown.
## Other options are unset by default.  To make sure that an option
## is disabled, you can use "unset <option>".
##
## Characters that are special in a shell should not be escaped here.
## Inside string parameters, quotes should not be escaped -- the last
## double quote on the line will be seen as the closing quote.

## Make 'nextword' (Ctrl+Right) and 'chopwordright' (Ctrl+Delete)
## stop at word ends instead of at beginnings.
# set afterends

## When soft line wrapping is enabled, make it wrap lines at blanks
## (tabs and spaces) instead of always at the edge of the screen.
# set atblanks

## Automatically indent a newly created line to the same number of
## tabs and/or spaces as the preceding line -- or as the next line
## if the preceding line is the beginning of a paragraph.
# set autoindent

## Back up files to the current filename plus a tilde.
# set backup

## The directory to put unique backup files in.
# set backupdir ""

## Use bold text instead of reverse video text.
# set boldtext

## Treat any line with leading whitespace as the beginning of a paragraph.
# set bookstyle

## The characters treated as closing brackets when justifying paragraphs.
## This may not include any blank characters.  Only closing punctuation,
## optionally followed by these closing brackets, can end sentences.
# set brackets ""')>]}"

## Automatically hard-wrap the current line when it becomes overlong.
# set breaklonglines

## Do case-sensitive searches by default.
# set casesensitive

## Constantly display the cursor position in the status bar or minibar.
# set constantshow

## Use cut-from-cursor-to-end-of-line by default.
# set cutfromcursor

## Do not use the line below the title bar, leaving it entirely blank.
# set emptyline

## Set the target width for automatic hard-wrapping and for justifying
## paragraphs.  If the specified value is 0 or less, the wrapping point
## will be the terminal's width minus this number.
# set fill -8

## Draw a vertical stripe at the given column, to help judge text width.
## (This option does not have a default value.)
# set guidestripe 75

## Remember the used search/replace strings for the next session.
set historylog

## Display a "scrollbar" on the righthand side of the edit window.
# set indicator

## Scroll the buffer contents per half-screen instead of per line.
# set jumpyscrolling

## Display line numbers to the left (and any anchors in the margin).
# set linenumbers

## Enable vim-style lock-files.  This is just to let a vim user know you
## are editing a file [s]he is trying to edit and vice versa.  There are
## no plans to implement vim-style undo state in these files.
set locking

## Fall back to slow libmagic to try and determine an applicable syntax.
# set magic

## The opening and closing brackets that are found by a matching-bracket
## search.  This may not contain blank characters.  The opening brackets
## must come before the closing ones, and they must be in the same order.
# set matchbrackets "(<[{)>]}"

## Suppress the title bar and show the filename plus a cursor-position
## percentage in the space of the status bar.
# set minibar

## Enable mouse support, if available for your system.  When enabled,
## mouse clicks can be used to place the cursor, set the mark (with a
## double click), and execute shortcuts.  The mouse will work in the
## X Window System, and on the console when gpm is running.
# set mouse

## Switch on multiple file buffers (inserting a file will put it into
## a separate buffer).
# set multibuffer

## Don't convert files from DOS/Mac format.
# set noconvert

## Don't display the helpful shortcut lists at the bottom of the screen.
# set nohelp

## Don't automatically add a newline when a file does not end with one.
# set nonewlines

## Set operating directory.  nano will not read or write files outside
## this directory and its subdirectories.  Also, the current directory
## is changed to here, so any files are inserted from this dir.  A blank
## string means the operating-directory feature is turned off.
# set operatingdir ""

## Remember the cursor position in each file for the next editing session.
# set positionlog

## Preserve the XON and XOFF keys (^Q and ^S).
# set preserve

## The characters treated as closing punctuation when justifying paragraphs.
## This may not contain blank characters.  Only these closing punctuations,
## optionally followed by closing brackets, can end sentences.
# set punct "!.?"

## Make status-bar messages disappear after 1 keystroke instead of after 20.
# set quickblank

## The regular expression that matches quoting characters in email
## or line-comment introducers in source code.  The default is:
# set quotestr "^([ 	]*([!#%:;>|}]|//))+"

## Try to work around a mismatching terminfo terminal description.
# set rawsequences

## Fix Backspace/Delete confusion problem.
# set rebinddelete

## Do regular-expression searches by default.
## Regular expressions are of the extended type (ERE).
# set regexp

## Save a changed buffer automatically on exit; don't prompt.
# set saveonexit

## Put the cursor on the highlighted item in the file browser, and
## show the cursor in the help viewer; useful for people who use a
## braille display and people with poor vision.
# set showcursor

## Make the Home key smarter: when Home is pressed anywhere but at the
## very beginning of non-whitespace characters on a line, the cursor
## will jump to that beginning (either forwards or backwards).  If the
## cursor is already at that position, it will jump to the true start
## of the line (the left edge).
# set smarthome

## Spread overlong lines over multiple screen lines.
# set softwrap

## Use this spelling checker instead of the internal one.  This option
## does not have a default value.
# set speller "aspell -x -c"

## Use the end of the title bar for some state flags: I = auto-indenting,
## M = mark, L = hard-wrapping long lines, R = recording, S = soft-wrapping.
set stateflags

## Use this tab size instead of the default; it must be greater than 0.
# set tabsize 8

## Convert each typed tab to the fitting number of spaces.
# set tabstospaces

## Snip whitespace at the end of lines when justifying or hard-wrapping.
# set trimblanks

## Save files by default in Unix format (also when they were DOS or Mac).
# set unix

## The two single-column characters used to display the first characters
## of tabs and spaces.  187 in ISO 8859-1 (0000BB in Unicode) and 183 in
## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
## The default when in a UTF-8 locale:
# set whitespace "»·"
## The default otherwise:
# set whitespace ">."

## Detect word boundaries differently by treating punctuation
## characters as parts of words.
# set wordbounds

## The characters (besides alphanumeric ones) that should be considered
## as parts of words.  This option does not have a default value.  When
## set, it overrides option 'set wordbounds'.
# set wordchars "<_>."

## Let an unmodified Backspace or Delete erase the marked region (instead
## of a single character, and without affecting the cutbuffer).
# set zap

## Hide the bars plus help lines and use the whole terminal as edit area.
# set zero

## Paint the interface elements of nano.  These are examples; there are
## no colors by default, except for errorcolor and spotlightcolor.
# set titlecolor bold,white,blue
# set promptcolor lightwhite,grey
# set statuscolor bold,white,green
# set errorcolor bold,white,red
# set spotlightcolor black,lightyellow
# set selectedcolor lightwhite,magenta
# set stripecolor ,yellow
# set scrollercolor cyan
# set numbercolor cyan
# set keycolor cyan
# set functioncolor green

## In root's .nanorc you might want to use:
# set titlecolor bold,white,magenta
# set promptcolor black,yellow
# set statuscolor bold,white,magenta
# set errorcolor bold,white,red
# set spotlightcolor black,orange
# set selectedcolor lightwhite,cyan
# set stripecolor ,yellow
# set scrollercolor magenta
# set numbercolor magenta
# set keycolor lightmagenta
# set functioncolor magenta

## === Syntax coloring ===
## For all details, see 'man nanorc', section SYNTAX HIGHLIGHTING.

## To include most of the existing syntax definitions, you can do:
include "/usr/share/nano/*.nanorc"

## Or you can select just the ones you need.  For example:
# include "/usr/share/nano/html.nanorc"
# include "/usr/share/nano/python.nanorc"
# include "/usr/share/nano/sh.nanorc"

## In /usr/share/nano/extra/ you can find some syntaxes that are
## specific for certain distros or for some less common languages.

## If <Tab> should always produce four spaces when editing a Python file,
## independent of the settings of 'tabsize' and 'tabstospaces':
# extendsyntax python tabgives "    "

## If <Tab> should always produce an actual TAB when editing a Makefile:
# extendsyntax makefile tabgives "	"

## === Key bindings ===
## For all details, see 'man nanorc', section REBINDING KEYS.

## If you want to suspend nano with one keystroke (instead of with ^T^Z):
# bind ^Z suspend main

## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
## the ASCII character for backspace, so it is bound by default to the
## backspace function.  The <Backspace> key itself produces a different
## keycode, which is hard-bound to the backspace function.  So, if you
## normally use <Backspace> for backspacing and not ^H, you can make
## <Ctrl+Backspace> delete the word to the left of the cursor with:
# bind ^H chopwordleft main

## For a more mnemonic Comment keystroke (overriding Cut-from-cursor):
# bind M-K comment main

## If you want ^L to just refresh the screen and not center the cursor:
# bind ^L refresh main

## When you sometimes type M-J instead of M-K, or M-T instead of M-R:
# unbind M-J main
# unbind M-T main
## (Those functions are still accessible through ^T^J and ^T^V.)

## For quickly uppercasing or lowercasing the word under or after the cursor.
## (These effectively select a word and pipe it through a sed command.)
#bind Sh-M-U "{nextword}{mark}{prevword}{execute}|sed 's/.*/\U&/'{enter}" main
#bind Sh-M-L "{nextword}{mark}{prevword}{execute}|sed 's/.*/\L&/'{enter}" main

## For copying a marked region to the system clipboard:
# bind Sh-M-T "{execute}|xsel -ib{enter}{undo}" main

## For snipping trailing blanks when you save a file:
# bind ^S "{execute}| sed 's/\s\+$//' {enter}{savefile}" main

## If you would like nano to have keybindings that are more "usual",
## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
## then uncomment these:
#bind ^X cut main
#bind ^C copy main
#bind ^V paste all
#bind ^Q exit all
#bind ^S savefile main
#bind ^W writeout main
#bind ^O insert main
#set multibuffer
#bind ^H help all
#bind ^H exit help
#bind ^F whereis all
#bind ^G findnext all
#bind ^B wherewas all
#bind ^D findprevious all
#bind ^R replace main
#unbind ^U all
#unbind ^N main
#unbind ^Y all
#unbind M-J main
#unbind M-T main
#bind ^A mark main
#bind ^P location main
#bind ^T gotoline main
#bind ^T gotodir browser
#bind ^T cutrestoffile execute
#bind ^L linter execute
#bind ^E execute main
#bind ^K "{mark}{end}{zap}" main
#bind ^U "{mark}{home}{zap}" main
#bind ^Z undo main
#bind ^Y redo main

Batal

⬅ / 197 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
📁 ModemManager	dir	—	15/06/26 13:45	0755	📂
📁 PackageKit	dir	—	15/06/26 13:45	0755	📂
📁 X11	dir	—	15/06/26 13:43	0755	📂
📁 alternatives	dir	—	22/07/26 11:06	0755	📂
📁 apache2	dir	—	22/07/26 11:11	0755	📂
📁 apparmor	dir	—	15/06/26 13:45	0755	📂
📁 apparmor.d	dir	—	15/06/26 13:45	0755	📂
📁 apport	dir	—	15/06/26 13:45	0755	📂
📁 apt	dir	—	15/06/26 13:47	0755	📂
📁 bash_completion.d	dir	—	15/06/26 13:45	0755	📂
📁 binfmt.d	dir	—	19/04/24 14:24	0755	📂
📁 byobu	dir	—	15/06/26 13:45	0755	📂
📁 ca-certificates	dir	—	15/06/26 13:43	0755	📂
📁 cloud	dir	—	01/07/26 16:37	0755	📂
📁 console-setup	dir	—	15/06/26 13:46	0755	📂
📁 credstore	dir	—	19/04/24 14:24	0700	📂
📁 credstore.encrypted	dir	—	19/04/24 14:24	0700	📂
📁 cron.d	dir	—	22/07/26 11:08	0755	📂
📁 cron.daily	dir	—	22/07/26 11:06	0755	📂
📁 cron.hourly	dir	—	15/06/26 13:43	0755	📂
📁 cron.monthly	dir	—	15/06/26 13:43	0755	📂
📁 cron.weekly	dir	—	15/06/26 13:45	0755	📂
📁 cron.yearly	dir	—	15/06/26 13:43	0755	📂
📁 cryptsetup-initramfs	dir	—	15/06/26 13:45	0755	📂
📁 dbus-1	dir	—	15/06/26 13:43	0755	📂
📁 default	dir	—	22/07/26 11:06	0755	📂
📁 depmod.d	dir	—	15/06/26 13:44	0755	📂
📁 dhcp	dir	—	15/06/26 13:43	0755	📂
📁 dpkg	dir	—	15/06/26 13:44	0755	📂
📁 fonts	dir	—	15/06/26 13:45	0755	📂
📁 fwupd	dir	—	15/06/26 13:45	0755	📂
📁 gnutls	dir	—	15/06/26 13:44	0755	📂
📁 groff	dir	—	15/06/26 13:45	0755	📂
📁 grub.d	dir	—	15/06/26 13:46	0755	📂
📁 gss	dir	—	15/06/26 13:43	0755	📂
📁 init.d	dir	—	22/07/26 11:06	0755	📂
📁 initramfs-tools	dir	—	15/06/26 13:45	0755	📂
📁 iproute2	dir	—	15/06/26 13:44	0755	📂
📁 iscsi	dir	—	15/06/26 13:45	0755	📂
📁 kernel	dir	—	15/06/26 13:45	0755	📂
📁 landscape	dir	—	21/08/25 01:44	0775	📂
📁 ld.so.conf.d	dir	—	15/06/26 13:44	0755	📂
📁 ldap	dir	—	15/06/26 13:45	0755	📂
📁 letsencrypt	dir	—	22/07/26 11:11	0755	📂
📁 libblockdev	dir	—	15/06/26 13:45	0755	📂
📁 libibverbs.d	dir	—	15/06/26 13:45	0755	📂
📁 libnl-3	dir	—	15/06/26 13:45	0755	📂
📁 logcheck	dir	—	15/06/26 13:45	0755	📂
📁 logrotate.d	dir	—	22/07/26 11:08	0755	📂
📁 lvm	dir	—	15/06/26 13:45	0755	📂
📁 mdadm	dir	—	15/06/26 13:45	0755	📂
📁 modprobe.d	dir	—	15/06/26 13:45	0755	📂
📁 modules-load.d	dir	—	15/06/26 13:44	0755	📂
📁 multipath	dir	—	22/07/26 06:15	0700	📂
📁 needrestart	dir	—	15/06/26 13:45	0755	📂
📁 netplan	dir	—	22/07/26 06:16	0755	📂
📁 network	dir	—	01/07/26 16:31	0755	📂
📁 networkd-dispatcher	dir	—	15/06/26 13:43	0755	📂
📁 newt	dir	—	15/06/26 13:43	0755	📂
📁 opt	dir	—	15/06/26 13:43	0755	📂
📁 pam.d	dir	—	15/06/26 13:45	0755	📂
📁 perl	dir	—	15/06/26 13:44	0755	📂
📁 php	dir	—	22/07/26 11:05	0755	📂
📁 pki	dir	—	15/06/26 13:45	0755	📂
📁 plymouth	dir	—	25/02/25 05:47	0755	📂
📁 pm	dir	—	15/06/26 13:45	0755	📂
📁 polkit-1	dir	—	15/06/26 13:45	0755	📂
📁 pollinate	dir	—	26/03/26 12:25	0755	📂
📁 profile.d	dir	—	15/06/26 13:45	0755	📂
📁 python3	dir	—	15/06/26 13:43	0755	📂
📁 python3.12	dir	—	15/06/26 13:44	0755	📂
📁 rc0.d	dir	—	22/07/26 11:06	0755	📂
📁 rc1.d	dir	—	22/07/26 11:06	0755	📂
📁 rc2.d	dir	—	22/07/26 11:06	0755	📂
📁 rc3.d	dir	—	22/07/26 11:06	0755	📂
📁 rc4.d	dir	—	22/07/26 11:06	0755	📂
📁 rc5.d	dir	—	22/07/26 11:06	0755	📂
📁 rc6.d	dir	—	22/07/26 11:06	0755	📂
📁 rcS.d	dir	—	15/06/26 13:45	0755	📂
📁 rsyslog.d	dir	—	15/06/26 13:45	0755	📂
📁 security	dir	—	15/06/26 13:44	0755	📂
📁 selinux	dir	—	15/06/26 13:43	0755	📂
📁 sensors.d	dir	—	15/06/26 13:45	0755	📂
📁 sgml	dir	—	15/06/26 13:45	0755	📂
📁 skel	dir	—	01/07/26 16:37	0755	📂
📁 sos	dir	—	15/06/26 13:45	0755	📂
📁 ssh	dir	—	22/07/26 06:16	0755	📂
📁 ssl	dir	—	15/06/26 13:44	0755	📂
📁 sudoers.d	dir	—	22/07/26 06:16	0750	📂
📁 supercat	dir	—	15/06/26 13:43	0755	📂
📁 sysctl.d	dir	—	15/06/26 13:46	0755	📂
📁 sysstat	dir	—	15/06/26 13:45	0755	📂
📁 systemd	dir	—	22/07/26 06:16	0755	📂
📁 terminfo	dir	—	15/06/26 13:43	0755	📂
📁 tmpfiles.d	dir	—	15/06/26 13:45	0755	📂
📁 ubuntu-advantage	dir	—	15/06/26 13:44	0755	📂
📁 udev	dir	—	15/06/26 13:44	0755	📂
📁 udisks2	dir	—	15/06/26 13:45	0755	📂
📁 ufw	dir	—	15/06/26 13:45	0755	📂
📁 update-manager	dir	—	15/06/26 13:45	0755	📂
📁 update-motd.d	dir	—	15/06/26 13:45	0755	📂
📁 update-notifier	dir	—	02/04/25 09:15	0755	📂
📁 usb_modeswitch.d	dir	—	16/12/23 21:51	0755	📂
📁 vim	dir	—	15/06/26 13:44	0755	📂
📁 vmware-tools	dir	—	15/06/26 13:45	0755	📂
📁 xdg	dir	—	15/06/26 13:43	0755	📂
📁 xml	dir	—	15/06/26 13:45	0755	📂
📄 .pwd.lock	lock	0 B	15/06/26 13:43	0600	✏️ ⬇
📄 .updated	updated	208 B	15/06/26 13:43	0644	✏️ ⬇
📄 adduser.conf	conf	3.4 KB	05/07/23 17:42	0644	✏️ ⬇
📄 bash.bashrc	bashrc	2.3 KB	31/03/24 08:41	0644	✏️ ⬇
📄 bash_completion	file	45 B	24/01/20 22:23	0644	✏️ ⬇
📄 bindresvport.blacklist	blacklist	367 B	02/08/22 15:34	0644	✏️ ⬇
📄 ca-certificates.conf	conf	6.7 KB	22/07/26 06:16	0644	✏️ ⬇
📄 ca-certificates.conf.dpkg-old	dpkg-old	6.1 KB	15/06/26 13:43	0644	✏️ ⬇
📄 crontab	file	1.1 KB	31/03/24 00:06	0644	✏️ ⬇
📄 crypttab	file	54 B	15/06/26 13:45	0644	✏️ ⬇
📄 debconf.conf	conf	2.9 KB	12/04/24 12:40	0644	✏️ ⬇
📄 debian_version	file	11 B	22/04/24 13:04	0644	✏️ ⬇
📄 deluser.conf	conf	1.7 KB	05/07/23 17:42	0644	✏️ ⬇
📄 dhcpcd.conf	conf	1.4 KB	31/03/24 08:48	0644	✏️ ⬇
📄 e2scrub.conf	conf	685 B	08/04/24 14:38	0644	✏️ ⬇
📄 ec2_version	file	34 B	15/06/26 13:46	0644	✏️ ⬇
📄 environment	file	106 B	15/06/26 13:43	0644	✏️ ⬇
📄 ethertypes	file	1.8 KB	17/10/22 22:36	0644	✏️ ⬇
📄 fstab	file	146 B	15/06/26 13:46	0644	✏️ ⬇
📄 fuse.conf	conf	694 B	08/04/24 15:57	0644	✏️ ⬇
📄 gai.conf	conf	2.5 KB	31/01/24 00:34	0644	✏️ ⬇
📄 group	file	799 B	22/07/26 11:06	0644	✏️ ⬇
📄 group-	file	783 B	15/06/26 13:46	0644	✏️ ⬇
📄 gshadow	file	671 B	22/07/26 11:06	0640	✏️ ⬇
📄 gshadow-	file	658 B	15/06/26 13:46	0640	✏️ ⬇
📄 hdparm.conf	conf	4.3 KB	06/10/22 12:47	0644	✏️ ⬇
📄 host.conf	conf	92 B	22/04/24 13:04	0644	✏️ ⬇
📄 hostname	file	31 B	22/07/26 06:16	0644	✏️ ⬇
📄 hosts	file	587 B	22/07/26 06:16	0644	✏️ ⬇
📄 hosts.allow	allow	411 B	15/06/26 13:45	0644	✏️ ⬇
📄 hosts.deny	deny	711 B	15/06/26 13:45	0644	✏️ ⬇
📄 inputrc	file	1.8 KB	31/03/24 08:21	0644	✏️ ⬇
📄 issue	file	26 B	06/02/26 07:23	0644	✏️ ⬇
📄 issue.net	net	19 B	06/02/26 07:23	0644	✏️ ⬇
📄 ld.so.cache	cache	21.9 KB	22/07/26 11:08	0644	✏️ ⬇
📄 ld.so.conf	conf	34 B	02/08/22 15:34	0644	✏️ ⬇
📄 legal	file	267 B	22/04/24 13:04	0644	✏️ ⬇
📄 libaudit.conf	conf	191 B	31/03/24 00:20	0644	✏️ ⬇
📄 locale.alias	alias	2.9 KB	30/03/24 07:42	0644	✏️ ⬇
📄 locale.conf	conf	13 B	15/06/26 13:46	0644	✏️ ⬇
📄 locale.gen	gen	9.3 KB	15/06/26 13:46	0644	✏️ ⬇
📄 localtime	file	114 B	18/03/26 15:32	0644	✏️ ⬇
📄 login.defs	defs	12.1 KB	22/02/24 12:30	0644	✏️ ⬇
📄 logrotate.conf	conf	586 B	08/04/24 16:11	0644	✏️ ⬇
📄 lsb-release	file	104 B	06/02/26 07:22	0644	✏️ ⬇
📄 machine-id	file	33 B	22/07/26 06:15	0444	✏️ ⬇
📄 magic	file	111 B	31/03/24 07:35	0644	✏️ ⬇
📄 magic.mime	mime	111 B	31/03/24 07:35	0644	✏️ ⬇
📄 manpath.config	config	5.1 KB	08/04/24 14:45	0644	✏️ ⬇
📄 mime.types	types	73.4 KB	12/07/23 13:08	0644	✏️ ⬇
📄 mke2fs.conf	conf	744 B	08/04/24 14:38	0644	✏️ ⬇
📄 modules	file	212 B	15/06/26 13:43	0644	✏️ ⬇
📄 mtab	file	0 B	22/07/26 16:32	0444	✏️ ⬇
📄 multipath.conf	conf	41 B	22/07/25 15:44	0644	✏️ ⬇
📄 nanorc	file	11.2 KB	23/05/23 12:56	0644	✏️ ⬇
📄 netconfig	file	767 B	31/03/24 02:18	0644	✏️ ⬇
📄 networks	file	91 B	22/04/24 13:04	0644	✏️ ⬇
📄 nftables.conf	conf	243 B	19/10/23 14:02	0755	✏️ ⬇
📄 nsswitch.conf	conf	526 B	15/06/26 13:43	0644	✏️ ⬇
📄 os-release	file	400 B	06/02/26 07:23	0644	✏️ ⬇
📄 overlayroot.conf	conf	6.8 KB	03/07/24 16:00	0644	✏️ ⬇
📄 overlayroot.local.conf	conf	112 B	15/06/26 13:46	0644	✏️ ⬇
📄 pam.conf	conf	552 B	13/10/22 17:41	0644	✏️ ⬇
📄 passwd	file	1.6 KB	15/06/26 13:45	0644	✏️ ⬇
📄 profile	file	582 B	22/04/24 13:04	0644	✏️ ⬇
📄 protocols	file	3.1 KB	17/10/22 22:19	0644	✏️ ⬇
📄 resolv.conf	conf	920 B	22/07/26 06:16	0644	✏️ ⬇
📄 rmt	file	54.7 KB	08/04/24 16:20	0755	✏️ ⬇
📄 rpc	file	911 B	17/10/22 22:24	0644	✏️ ⬇
📄 rsyslog.conf	conf	1.2 KB	22/03/24 02:28	0644	✏️ ⬇
📄 screenrc	file	3.6 KB	20/06/16 00:31	0644	✏️ ⬇
📄 sensors3.conf	conf	10.3 KB	31/03/24 02:31	0644	✏️ ⬇
📄 services	file	12.5 KB	27/03/21 22:32	0644	✏️ ⬇
📄 shadow	file	920 B	22/07/26 06:16	0640	✏️ ⬇
📄 shadow-	file	920 B	22/07/26 06:15	0640	✏️ ⬇
📄 shells	file	148 B	15/06/26 13:45	0644	✏️ ⬇
📄 subgid	file	0 B	15/06/26 13:43	0644	✏️ ⬇
📄 subuid	file	0 B	15/06/26 13:43	0644	✏️ ⬇
📄 sudo.conf	conf	4.2 KB	08/04/24 14:50	0644	✏️ ⬇
📄 sudo_logsrvd.conf	conf	9.6 KB	08/04/24 14:50	0644	✏️ ⬇
📄 sudoers	file	1.8 KB	29/01/24 17:09	0440	✏️ ⬇
📄 sysctl.conf	conf	2.2 KB	24/03/24 15:35	0644	✏️ ⬇
📄 timezone	file	8 B	15/06/26 13:44	0644	✏️ ⬇
📄 ucf.conf	conf	1.2 KB	27/01/23 13:29	0644	✏️ ⬇
📄 usb_modeswitch.conf	conf	1.5 KB	08/04/24 16:21	0644	✏️ ⬇
📄 vconsole.conf	conf	150 B	15/06/26 13:43	0644	✏️ ⬇
📄 vtrgb	file	158 B	26/02/24 12:58	0644	✏️ ⬇
📄 wgetrc	file	4.8 KB	19/06/24 12:14	0644	✏️ ⬇
📄 xattr.conf	conf	681 B	08/04/24 15:54	0644	✏️ ⬇
📄 zsh_command_not_found	file	460 B	20/01/23 13:39	0644	✏️ ⬇

✏️ Rename

🔑 Ubah Permission